Heavy hammer crusher

  At present, the sand and gravel industry is in full swing, and investors in sand and gravel enterprises are increasingly diversifying their equipment. Many investors want to invest less and get quick results. In general, the sand industry equipment configuration of a broken jaw were selected, two stage crushing selection of back breaking or cone crusher, three stage crushing used sand making machine, large investment, high cost, not suitable for small and medium sized enterprises.

  The hammer crusher is the best equipment to solve the above problems. The following is our company heavy hammer broken product introduction：
  Special stone hammer crusher is my company for the gravel production equipment of medium and small investors and less investment and quick, the fusion of the traditional single stage hammer crusher and impact crusher characteristics, especially suitable for crushing medium hard limestone, the compressive strength is less than or equal to 200MPa, and the amount of calcium than stone 40%. Can realize one machine multi-purpose, can be used for a break, to achieve a molding, can also be used for two broken (two broken can choose the special counterattack crusher, get good particle shape), reduce the investment cost of 30~40%. At the same time, this model has the advantages of high output, low energy consumption and low cost.

  Both the shape and the structure of the heavy hammer crusher and the stone counter crusher are basically the same, and the difference is only in the form of the rotor. Hammer crusher rotor with the hammer, hammer can rotate around the axis, special stone crusher rotor with high chromium plate hammer, hammer crusher hammer weight, single rotor speed, reasonable hammer inertia, can be expected to have a large size, a small particle size of the crushing effect.
  Special gravity crusher for stone can be equipped with low voltage motor, high voltage motor and double motor.

Performance characteristics

1, a machine multi-purpose, can be used for a break, can also be used for two broken (eat back material), but also can be achieved once forming (single broken)
2, no grate design, high yield
3, a molding, simplify the process
4, reduce investment costs by 40%
5,low energy consumption design

technical parameter：

型号	转子规格(mm)	进料粒度(mm)	出料粒度(mm)	处理量(t/h)	电机功率(kw)	重量(t)
ZPC1418	Φ1420*1750	≤700	≤150	250-400	320-400	27
ZPC1620	Φ1650*2000	≤900	≤200	500-800	630	45
ZPC1820	Φ1820*2000	≤1000	≤200	700-1000	800	58
ZPC2025	Φ2020*2550	≤1200	≤250	900-1400	900-1120	90
ZPC2328	Φ2300*2800	≤1200	≤300	1400-2000	1420-1800	132

Attachment: technical parameters for counterattack crusher used for back crushing, crushing and reshaping：

型号	转子规格(mm)	进料粒度(mm)	出料粒度(mm)	处理量(t/h)	电机功率(kw)	重量(t)
FPC1418	Φ1420*1750	≤300	≤40	200-350	320-400	27
FPC1620	Φ1650*2000	≤300	≤60	400-600	560-630	45
FPC1820	Φ1820*2000	≤300	≤60	550-750	630-710	58
FPC2025	Φ2020*2550	≤400	≤80	700-1000	800-1000	90
FPC2328	Φ2300*2800	≤400	≤80	1260-1600	1260-1600	132

PZC hammer crusher equipment technical parameters: (PCZ heavy)

型号	转子直径 长度（mm）	进料口尺寸 宽*长（mm）	进料粒度（mm）	生产能力(t/h)	电机功率(kw)	外型尺寸 长宽高（mm）
PCZ1308	1310×790	850×800	≤600	100-160	132	2818×2100×2390
PCZ1510	1500×900	1000×90	≤700	160-210	132×2	3260×2414×2750
PCZ1512	1500×1160	1200×900	≤750	250-320	160×2	3260×2624×2750
PCZ1615	1650×1452	1500×1200	≤1000	360-420	200×2	3456×2915×3185
PCZ1620	1660×1900	2000×1200	≤1200	500-800	400×2	3500×3100×3200
PCZ1820	1800×2000	2000×1200	≤1200	700-900	450×2	3880×3000×3516

PCZ hammer crusher equipment technical parameters: (PCZ standard type)

型号	转子直径 长度（mm）	进料口尺寸 宽*长（mm）	进料粒度（mm）	生产能力(t/h)	电机功率(kw)	外型尺寸 长宽高（mm）
PC-0706	700×570	618×510	≤400	50-70	75	1950×1340×1480
PC-0808	800×750	780×610	≤500	80-100	132	2280×1790×1670
PC-0910	900×1000	1070×750	≤600	150-200	110×2	2600×2200×1940
PC-1012	1000×1180	1255×810	≤650	250-300	132×2	2800×2310×2210
PC-1213	1200×1280	1350×900	≤750	300-350	160×2	2970×2580×2510
PC-1216	1200×1600	150×1000	≤850	400-450	160×2	3000×2700×2800
PC-1220	1200×2000	2000×900	≤850	400-500	200×2	3067×3373×2579