Columncenter

  • Sand making equipment
  • Crushing equipment
  • Mineral processing equipment
  • Screening and washing sand
  • Feeding and conveying
  • Mining machine parts
  • drying equipment
    • Recommendproduct

    Relevantinformation

  • Mobile Crusher
  • Vertical Impact Crusher
  • Hydraulic Cone Crusher
  • Single-rotor Hammer Crusher
    • Crushing equipment

    Impact Crusher

    author£ºQingshan Technology source£ºwww.168sjw.com Date£º2017/9/20 15:48:25 Flow number£º

    Impact Crusher

        Impact crusher is a kind of late-model crushing equipment, generally as the secondary crushing stage. It is widely used in the road, railway, mining, metallurgy and other industries. It is applied for crushing the materials whose compressive strength is less than 320MPa, such as limestone, granite, basalt, dolomite, shale, sandstone, etc.

    Working Principle

        Impact crusher utilizes the impact energy to crush materials. Under the drive of motor, the rotor, with the blow bars, keeps in the high-speed rotation. When the materials fall into the working area of rotor, the blow bars strike the materials and knock them onto the impact plates. Then the materials are rebounded to the working area of rotor for crushing again. This above process repeats continuously. Through thecrushing chambers of 1, 2, 3 in turn, the materials become smaller and smaller until fall out of the machine as the qualified granularity. The discharge granularity and shape can be controlled through adjusting the gap between the impact plate and rotor.

    Technical Parameters

    Model
    Rotor size
    Inlet size
    Max. feeding size
    Capacity
    Power
    Weight
    Overall dimension
    (mm)
    (mm)
    (mm)
    (t/h)
    (kw)
    (t) 
    (mm)
    HYPF-1007
    ¦µ1000¡Á700
    400¡Á730
    250
    20-70
    37-55
    9
    2330¡Á1660¡Á2300
    HYPF-1010
    ¦µ1000¡Á1050
    400¡Á1080
    300
    50-90
    55-75
    15
    2370¡Á1700¡Á2390
    HYPF-1210
    ¦µ1250¡Á1050
    400¡Á1080
    300
    70-130
    110
    17
    2680¡Á2160¡Á2800
    HYPF-1214
    ¦µ1250¡Á1400
    400¡Á1430
    300
    100-180
    132
    22
    2650¡Á2460¡Á2800
    HYPF-1315
    ¦µ1320¡Á1500
    860¡Á1520
    350
    130-250
    200
    26
    3180¡Á2720¡Á2620

    Feature

    a) The material of blow bar is high chrome alloy which is of high impact resistance and high wear resistance. The abrasion rate of parts is low.
    b) It is a kind of late-model shaping machine. The final particles are mainly of cubical shape, which is helpful to the bonding of concrete.
    c) The raw materials must be crushed repeatedly through the crushing chambers of 1, 2 and 3 in turn, so that the particle shape is better and the service life of crusher is longer.