Three Pass Drye

Specifications

Three Drum Dryer:
1.High thermal efficiency
2.Reliable for running
3.high degree of mechanization
4.excellent Structure

Description:

  The Rotary Dryer is used to drying humidity particle materials, such as yellow sand used by industry, variety of sand which used in foundry industry, blast furnace slag which used in cement industry of building materials, chemical, food, compound fertilizer, copra, etc. The water content 0.5-0.1% or less can be achieved after the drying process.

Advantages:

(1)Reasonable structure;
(2) Well-produced;
(3) High yield;
(4) Convenient operation
(5).The fuel can be coal, oil, natural gas etc, dry mass, granule and powder material
(6).Reduce land area for 50% compared to single drum rotary dryer, so construction investment is saved 50%power consumption saved 60%

Specifications

Three Drum Dryer:
1.High thermal efficiency
2.Reliable for running
3.high degree of mechanization
4.excellent Structure

Description:

  The Rotary Dryer is used to drying humidity particle materials, such as yellow sand used by industry, variety of sand which used in foundry industry, blast furnace slag which used in cement industry of building materials, chemical, food, compound fertilizer, copra, etc. The water content 0.5-0.1% or less can be achieved after the drying process. 

Advantages:

(1)Reasonable structure;
(2) Well-produced;
(3) High yield;
(4) Convenient operation
(5).The fuel can be coal, oil, natural gas etc, dry mass, granule and powder material
(6).Reduce land area for 50% compared to single drum rotary dryer, so construction investment is saved 50%power consumption saved 60%

working principle:

 Rotary Dryer adopts direct flow type of heating with heat source from firing unit. The material to be dried is pushed back immediately by spiral board when enters the shell from feeding tank and feeding chute. Because the Rotary Dryer is installed in slope, material flows to the back end under gravity and rotation force, meanwhile, the Rotary Dryer lifted by board repeatedly and thrown down accordingly, which make the material from even curtain and exchange heat sufficiently with inner the heat flow. In the end, water in the material is dried by repeatedly scattering.

Specification:

Diagram：