![](/m/UpFile/c2.jpg)
Mobile Crusher
IV. Spring Cone Crus¡
Jaw Crusher
Impact Crusher
Vertical Impact Crus¡
Hydraulic Cone Crush¡
Single-rotor Hammer ¡
Circular Vibrating S¡
Operation Principle
In the input system
there are fan and burner devices. In the discharge system, there are
discharge devices and dust collector and other devices, which will be
designed according to the customer¡¯ requirement. The material first go
into inside drum, because there are the spiral shape boards fixed in the
drum, when the dryer makes rotary work, the spiral shape board will
stir the material and make the material do longitudinal movement. When
the materials reach the right side of the drum, under gravity effect,
the materials go into the second drum, because of director plate device,
the materials go into the second drum, and the same work principle, the
materials go into outside drum, in the drying working process, the
materials make three times drying, so the material can be dried
completely.
Technical Parameters
final moisturer
(percent %) |
main motor power
(kw) |
|||||||||
Yellow river sand
|
River sand
|
Slag
|
Coal powder ash
|
Clay
|
||||||
AQS623
|
5-6
|
3-5
|
2-3
|
2-3
|
3-4
|
£¼0.5%
|
5-7
|
3
|
||
AQS625
|
6-10
|
4-6
|
3-4
|
3-4
|
5-6
|
£¼0.5%
|
5-7
|
3¡Á2
|
||
AQS6210
|
12-18
|
10-12
|
8-12 |
8-10
|
10-12
|
£¼0.5%
|
8-10
|
2¡Á4
|
||
AQS6225
|
28-35
|
23-25
|
22-25
|
20-23
|
20-25 |
£¼0.5%
|
10-12
|
5.5¡Á4
|
||
AQS6235
|
45-55
|
40-45 |
38-40
|
35-40
|
40-45
|
£¼0.5%
|
12-14
|
7.5¡Á4
|
Features
1. Triple-drum rotary drier use telescope-feed structure, dry the material quickly.
2. Simple design, self-insulation, improve the heat efficiency to exceed 80%.
3. Refined experience, stable operation.
4. Good drying performance. coal consumption<8kg when drying 1 t material.
5. The fuel can be coal, oil, natural gas etc, dry mass and granule and powder material.
6.
Reduce land area for 50% compared to single drum rotary dryer,so
construction investment is saved 50%,power consumption saved 60%.
7. Finished product moisture can be adjusted depends on requirement of client.
8. Lower outlet temperature .longer dust removal using life.
9. Drive by tug not gear and pinion.
10. Finished product temperature lower than 60oC,packing can be done continuously.