Columncenter

  • Sand making equipment
  • Crushing equipment
  • Mineral processing equipment
  • Screening and washing sand
  • Feeding and conveying
  • Mining machine parts
  • drying equipment
    • Recommendproduct

    Relevantinformation

  • Sand recycling machine
    • Mineral processing equipment

    XJB flotation machine

    author：Qingshan Technology source：www.168sjw.com Date：2017/9/20 17:29:15 Flow number：

      The mixer of the flotation machine is made up of several tilted round bars, so it is called rod type flotation machine.

    Working Principle

      Bar type flotation machine trough, the structure is divided into two kinds of DC slot and slot. Hollow groove (main shaft), rod wheel, boss and arc steady flow device are installed in the DC trough. The DC trough can not suck the ore pulp from the bottom, only flotation, so it is also called flotation tank. The main difference between the suction slot and the DC slot, a suction paddle wheel and the lower part is provided with bar type wheel, suction paddle wheel with centrifugal pump, can be absorbed into the pulp from the bottom. In the roughing, selection and sweep of the various operations of the pulp point, all need to install suction tank, to ensure that the flow of gravity connection.

      The flotation cell (DC trough) work, with the help of the hollow shaft under oblique rotation of skew wheel, so that the pulp along a certain angle strongly to the groove bottom around the radiation, thus forming a negative pressure on the skew wheel measured lower, outside air inhaled through the hollow shaft. Under the action of the inclined bar wheel, the ore pulp and the air are fully mixed. At the same time, the air stream is divided into tiny bubbles. The mineralized bubbles rise up to the foam area, and then foam products are scraped. Besides the above-mentioned function, suction tank has the function of sucking slurry.

    Technical Parameters

    型号
    槽类型
    有效容积(m3)
    处理能力(m3/min)
    叶轮直径(mm)
    叶轮转速(r.p.m)
    搅拌用电机功率（kw)
    刮板用电机功率（kw))
    4槽重量(kg)
    XJB-1
    吸入槽
    1
    1.5-1.7
    400
    440
    5.5
    1.5
    5344
    XJB-1
    直流槽
    1
    1.5-1.7
    410
    410
    4
    0.8
    5344
    XJB-1D
    吸入槽
    1
    1.5-1.7
    400
    440
    5.5
    1.5
    5479
    XJB-1D
    直流槽
    1
    1.5-1.7
    410
    410
    4
    0.8
    5479
    XJB-2
    吸入槽
    2
    1.5-1.4
    450
    360
    15
    1.1
    9071
    XJB-2
    直流槽
    2
    1.5-1.4
    540
    360
    11
    1.1
    9071
    XJB-2D
    吸入槽
    2
    1.5-1.4
    450
    360
    15
    1.1
    9320
    XJB-2D
    直流槽
    2
    1.5-1.4
    540
    360
    11
    1.1
    9320
    XJB-4
    吸入槽
    4
    2.0-4
    700
    280
    18.5
    1.1
    16325
    XJB-4
    直流槽
    4
    2.0-4
    510
    280
    18.5
    1.1
    16325